Sika® Waterproofing in Saudi Arabia
Liquid-applied membranes, cementitious slurries, integral admixtures and swellable waterstops for roofs, basements, wet areas and water-retaining structures. Waterproofing materials supplied from our Riyadh and Jeddah branches.
Typical applications
- Roof decks and podium slabs
- Basements and retaining walls
- Water tanks and wet rooms
- Construction joints and pipe penetrations
Working on a tank? See the guide to water tank waterproofing — methods compared, potable-water approvals, and the product for each case.
Products
38 products in this range
Add what you need to a quote request, or download the data sheet from the library.
Sika Flexitape Heavy
Polyamide reinforcement fabric for Sikalastic liquid membranes
Sika Igasol Emulsion BA
Rubberised bituminous waterproofing emulsion · 200 L drum
Sika Reemat Premium
Glass fibre mat for Sikalastic liquid membranes · 1.3 m wide rolls
Sikalastic 152 SA
Fibre-reinforced cementitious mortar for flexible waterproofing · 33 kg set
Sikalastic 311 AE
Cold-applied, pitch-modified polyurethane waterproofing membrane · 20 L pail
Sikalastic 560 GCC
Liquid-applied roof waterproofing, Sika Co-Elastic Technology · 20 / 25 kg pail
Sikalastic M 262
Polyurethane liquid membrane for wet rooms and non-exposed areas · 25 kg unit
Sikalastic M 262 R
One-part polyurethane membrane for roof waterproofing · 25 kg unit
Sikalastic WP 668
Flexible waterproof coating for use under tiles and natural stone · 25 kg pail
Sikalite AE
Integral waterproofing admixture for mortar and concrete · 1 / 5 kg bag
SikaShield E35 PE EG GCC 4 mm
Torch-applied, reinforced elastomeric bituminous membrane, 4 mm · 1 m x 10 m roll
SikaShield E35 PE SA 4 mm
Torch-applied, reinforced elastomeric bituminous membrane, 4 mm · 1 m x 10 m roll
SikaShield E36 PE SA 4 mm
Torch-applied, reinforced elastomeric bituminous membrane, 4 mm · 1 m x 10 m roll
SikaShield E55 PE SA 1.5 mm
Peel-and-stick self-adhesive bituminous membrane for below-ground use, 1.5 mm · 1 m wide roll
SikaShield E55 PE SA EG 1.5 mm
Peel-and-stick self-adhesive bituminous membrane for below-ground use, 1.5 mm · 1 m wide roll
SikaShield E55 PE SA EG 2 mm
Peel-and-stick self-adhesive bituminous membrane for below-ground use, 2 mm · 1 m x 15 m roll
SikaShield E65 PE SA 4 mm
Torch-applied, reinforced elastomeric bituminous membrane, 4 mm · 1 m x 10 m roll
SikaShield E66 PE SA 4 mm
Torch-applied, reinforced elastomeric bituminous membrane, 4 mm · 1 m x 10 m roll
SikaShield E80 HDPE SA 1.5 mm
Self-adhesive bituminous membrane for post-applied below-ground waterproofing · 1 m wide roll
SikaShield P25 PE SA 4 mm
Torch-applied, reinforced plastomeric bituminous membrane, 4 mm · 1 m x 10 m roll
SikaShield P26 MG SA 4 mm
Torch-applied, reinforced plastomeric bituminous membrane with mineral finish, 4 mm · 1 m x 10 m roll
SikaShield P26 PE EG GCC 4 mm
Torch-applied, reinforced plastomeric bituminous membrane, 4 mm · 1 m x 10 m roll
SikaShield P26 PE SA 4 mm
Torch-applied, reinforced plastomeric bituminous membrane, 4 mm · 1 m x 10 m roll
SikaShield P27 PE SA 4 mm
Torch-applied, reinforced plastomeric bituminous membrane, 4 mm · 1 m x 10 m roll
SikaShield PB P15 PE 3 mm
Semi-flexible protection and recovery board, 3 mm · 1 m x 2 m board
SikaShield PB P15 PE 3.5 mm
Semi-flexible protection and recovery board, 3.5 mm · 1 m x 2 m board
SikaShield PB P15 PE 4 mm
Semi-flexible protection and recovery board, 4 mm · 1 m x 2 m board
SikaShield PB P15 PE 6 mm
Semi-flexible protection and recovery board, 6 mm · 1 m x 2 m board
SikaShield PB P15 PE SA 3 mm
Semi-flexible protection and recovery board, 3 mm · 1 m x 2 m board
SikaShield PB P15 PE SA 3.5 mm
Semi-flexible protection and recovery board, 3.5 mm · 1 m x 2 m board
SikaShield PB P15 PE SA 4 mm
Semi-flexible protection and recovery board, 4 mm · 1 m x 2 m board
SikaShield PB P15 PE SA 6 mm
Semi-flexible protection and recovery board, 6 mm · 1 m x 2 m board
Common questions
About waterproofing
What is the difference between liquid-applied and cementitious waterproofing?
Liquid-applied membranes cure into a seamless elastic film and bridge movement, which suits roofs and podium decks exposed to thermal cycling. Plain cementitious slurries bond rigidly, withstand water pressure well and tolerate very little movement, so they suit tanks and basement walls. Polymer-modified cementitious systems sit between the two and will bridge fine cracks. Tell us the element and the exposure and we will point you to the right Sika system.
Which waterproofing products hold up to Saudi roof temperatures?
Roof surface temperatures in the Kingdom regularly exceed what a general-purpose membrane is rated for, and application windows are limited in summer. The Sika range includes systems specified for high-temperature exposure and UV resistance. Ambient and substrate temperature limits are stated on each product's data sheet — send us your location and we will confirm which options are suitable.
Do you supply waterproofing approved for potable water tanks?
Yes. On its potable water solutions page Sika lists waterproofing mortars — SikaTop-107 Seal, Sikalastic-1K and Sika-110 HD — for the internal waterproofing and protection of potable water reservoirs, alongside multi-layer epoxy resins, hot-spray polyurea and TPO sheet membranes. Of those we stock SikaTop-107 Seal AE, and we also hold SikaSwell A and Sikadur-Combiflex SG for joints and Sika Injection-201 CE, which Sika lists as a PU injection resin with drinking water approval. Not every tank product is a potable system: Sikagard-320 EPS is specified for non-potable structures. The applicable certification is stated on each data sheet. This is not a detail to assume — tell us the tank is for drinking water when you enquire and we will supply only products carrying the relevant approval.
Always refer to the full Sika technical data sheet before application.
Need pricing or a product recommendation?
Send us your scope or product list. We'll come back with pricing and the data sheets for the right products.